A220 DRIVEFLEX® VFD 1kV XHHW-2 with 3 Symmetrical Grounds

Application

Dual-shielded motor supply cable to connect power to 3-phase motors, VFDs and servo drives
Three insulated symmetrical ground design helps to reduce stray currents
Cable design for harsh industrial environments and operating conditions with high noise levels
Thermoset XLPE insulation offering superior overload and short-circuit temperature
Type XHHW-2 insulation offering smaller ODs for general VFD applications
Compliant with NFPA 79 requirements
TC-ER for use with cable trays without conduit, which can reduce installation costs in industrial environments
WTTC - wind turbine tray cable rating for use in wind power generation
Dry, damp or wet conditions

Characteristics

Flexible XLPE conductors
Three symmetrical, insulated grounds (PEs)
High insulation resistance
Low capacitance cable
Effective dual layer shield for EMC compliance
Oil resistant jacket designed for easy stripping
Non-wicking fillers
Ecolab certified resistance to common cleaning agents and chemicals used in food and beverage washdown procedures
Crush impact resistant
Gas/vapor-tight sheath per UL 1277
Sunlight resistant
Flame retardant
Direct burial
Talc and silicone free

Part number	Description No. of conductors incl. ground	OD - Ø ca. mm	OD - Ø ca. inches	Weight Lbs/Mft	Copper Lbs/Mft
A2200603	AWG 6 (266 strands) AWG12 (50 strands) 3C + 3PE	23.9	0.941	677	432
A2200403	AWG 4 (420 strands) AWG12 (50 strands) 3C + 3PE	26.4	1.039	872	586
A2200203	AWG 2 (672 strands) AWG10 (80 strands) 3C + 3PE	29.3	1.155	1,230	875
A2200103	AWG 1 (840 strands) AWG8 (128 strands) 3C + 3PE	35.2	1.385	1,600	1,121
A2201/003	1/0 (1064 strands) AWG8 (128 strands) 3C + 3PE	37.1	1.462	1,850	1,348
A2202/003	2/0 (1344 strands) AWG8 (128 strands) 3C + 3PE	39.1	1.540	2,187	1,620
A2203/003	3/0 (1664 strands) AWG6 (206 strands) 3C + 3PE	41.4	1.630	2,705	2,059
A2204/003	4/0 (2052 strands) AWG6 (206 strands) 3C + 3PE	47.8	1.880	3,336	2,461
A22025003	250 MCM* (2432 strands) AWG6 (206 strands) 3C + 3PE	51.6	2.032	3,815	2,851
A22035003	350 MCM* (3458 strands) AWG4 (322 strands) 3C + 3PE	59.4	2.340	5,153	3,993
A22050003	500 MCM* (4864 strands) AWG4 (322 strands) 3C + 3PE	65.8	2.589	6,803	5,397

Voltage:	600V 90C TC-ER 1000V 90C Flexible VFD Servo Cable 1000V 90C WTTC
Temperature range:	-40°C - +90°C static
Bending radius min:	7.5 x cable OD
Conductor marking:	Black with white numbers and three green/yellow ground
Approvals:	UL Type Flexible Motor Supply Cable, Flexible VFD Servo Cable up to 4/0, Meets NEC 336, 392 Class I & II Div. 2 and Class I Zone 2 per NEC 501, 502, 505 UL Types WTTC, TC-ER c(UL), CIC FT4, CE UL 1277, UL 2277 P-07-KA130021-MSHA RoHS, REACH, TSCA *1000V WTTC, 600V TC-ER only
Construction:	AWG conductor Class K flexible fine wire stranded tinned copper conductors for improved electrical characteristics and reduced oxidation Thermoset XLPE insulation, Wet/Dry XHHW-2 (3C power + 3C Grounds/PEs) Shielded with foil tape, tinned copper braid with ≥80% optical coverage, and drain wire Oil resistant PVC jacket Black jacket similar to RAL 9005
Oil resistance:	Oil Res II Specifications subject to change without prior notice