A218 DRIVEFLEX® VFD RHW-2 with 2 Control Pairs

Application

Dual-shielded motor supply cable to connect 3-phase motors, VFDs and servo drives
Cable design for harsh industrial environments and operating conditions with high noise levels
Thermoset XLPE insulation offering superior overload and short circuit temperature
Increased wall thickness insulation type RHW-2, offering lower capacitance and higher impedance making it ideal for applicaitons with high voltage spikes and long cable runs
Compliant with NFPA 79 requirements
TC-ER-JP for use with cable trays without conduit, which can reduce installation costs in industrial environments
WTTC – wind turbine tray cable rating for use in wind power generation
Dry, damp or wet conditions

Characteristics

Flexible XLPE conductor design
High insulation resistance
Low capacitance cable
Effective dual layer shield for EMC compliance
Oil resistant jacket designed for easy stripping
Non-wicking fillers
Ecolab certified resistance to common cleaning agents and chemicals used in food and beverage washdown procedures
Crush impact resistant
Gas/vapor-tight sheath per UL 1277
Sunlight resistant
Flame retardant
Direct burial
Talc and silicone free

Part number	Description No. of conductors incl. ground	OD - Ø ca. mm	OD - Ø ca. inches	Weight Lbs/Mft	Copper Lbs/Mft
A2181604	AWG 16 (26/30) 2 TSP AWG18 (19/30) 4 + 2 pairs	17.8	0.699	278	113
A2181404	AWG 14 (41/30) 2 TSP AWG16 (26/30) 4 + 2 pairs	19.3	0.760	330	149
A2181204	AWG 12 (65/30) 2 TSP AWG16 (26/30) 4 + 2 pairs	20.2	0.795	388	187
A2181004	AWG 10 (105/30) 2 TSP AWG14 (41/30) 4 + 2 pairs	23.6	0.930	553	261
A2180804	AWG 8 (168/30) 2 TSP AWG14 (41/30) 4 + 2 pairs	27.7	1.070	778	364

Voltage:	600V 90C TC-ER-JP 1000V 90C Flexible VFD Servo Cable 1000V 90C WTTC 1000V 105C AWM
Temperature range:	-40°C - +105°C static
Bending radius min:	6 x cable OD
Conductor marking:	Black with white numbers and one green/yellow ground
Approvals:	UL Type Flexible Motor Supply Cable, Flexible VFD Servo Cable, TC-ER-JP, WTTC, DP-1 Meets NEC 336, 392 Class I & II Div. 2 and Class I Zone 2 per NEC 501, 502, 505 AWM 20886 c(UL) TC, CIC FT4 UL 1277 P-07-KA130021-MSHA RoHS, REACH, TSCA
Construction:	AWG conductor Class K flexible fine wire stranded tinned copper conductors for improved electrical characteristics and reduced oxidation Thermoset XLPE insulation, Wet/Dry (4C RHW-2, 2 Pairs XHHW-2) Shielded with foil tape, tinned copper braid with 80% optical coverage, and drain wire Oil resistant PVC jacket Black jacket similar to RAL 9005
Oil resistance:	Oil Res II Specifications subject to change without prior notice